View TCG057VGLBG-H50_5382115.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

spec no. tq3c-8eaf0-e1dez28-00 ? s p e c date may 24, 2010 t y p e : t c g 0 5 7 v g l b g - h 5 0 <5.7 inch vga transmissive color tft ???? with led backlight, and touch panel > kyocera corporation ? kagoshima hayato plant lcd division ??? this specification is subject to change without notice. consult kyocera before ordering. designed by: engineering dept. confirmed by: qa dept. original issue date prepared checked approved checked approved may 24, 2010 c o n t e n t s 1. application 2. construction and outline 3. mechanical specifications 4. absolute maximum ratings 5. electrical characteristics 6. optical characteristics 7. interface signals 8. input timing characteristics 9. backlight characteristics 10. design guidance for analog touch-panel 11. lot number identification 12. warranty 13. precautions for use 14. reliability test data 15. outline drawing .bz www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page - warning 1. this kyocera lcd module has been sp ecifically designed for use only in electronic devices and industrial mach ines in the area of audio control, office automation, industrial control, home appliances, etc. the module should not be used in applications where the highest level of safety and reliability are required and module fa ilure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. customer agrees to indemnify, defend and hold kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of customer's use, or sale for use, or kyocera modules in applications. caution 1. kyocera shall have the right, whic h customer hereby acknowledges, to immediately scrap or destroy tooling for kyocera modules for which no purchase orders have been received from the customer in a two-year period. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page - revision record designed by : engineering dept. confirmed by : qa dept. date prepared checked approved checked approved rev.no. date page descriptions www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 1 m804001 ???????????????????????????????? 1. application this document defines the specification of TCG057VGLBG-H50. (rohs compliant) 2. construction and outline lcd backlight system polarizer additional circuit touch panel surface film : transmissive color dot matrix type tft : led : glare low-reflection treatment : timing controller, power supply (3.3v input) (without constant current circuit for led backlight) : analog type(glass/glass) : glare anti-reflection treatment 3. mechanical specifications 3-1. lcd item specification unit outline dimensions 1) 127.2(w)100.4(h)6.92(d) mm active area 115.2(w)86.4(h) (14.4cm/5.7 inch(diagonal)) mm dot format 640(b,g,r)(w)480(h) dot dot pitch 0.06(w)0.18(h) mm base color 2) normally white - mass tbd g 1) projection not included. please refer to outline for details. 2) due to the characteristics of the lcd material, the color varies with environmental temperature. 3-2. touch panel item specification unit input radius-0.8 stylus or finger - actuation force 0.1 ? 2.0 n striking(finger-input) 1) 1 million hits operating life sliding(stylus?input) 2) 100 thousand characters surface hardness 2h or more(pencil hardness) - www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 2 m804001 ???????????????????????????????? 1) striking test condition te sti ng ro d : silicon rubber (hardness:60),tip : r = 4.0, testing location : in active area input voltage : dc5v load : 2.94n cycle : 5hits/sec judgment : no defect in function : no appearance defect which causes trouble to use. *dents, blurs and marks on surface film : neglected 2) sliding test condition testing rod : polyacetal resin, tip : r = 0.8 testing location : in active area input voltage : dc5v load : 2.45n input length : 10mm input speed : 50mm/sec sliding times : 10mm sliding (back and forth) counts as 2 times. judgment : no defect in function : no appearance defect which causes trouble to use. *dents, blurs and marks on surface film : neglected www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 3 m804001 ???????????????????????????????? 4. absolute maximum ratings 4-1. electrical absolute maximum ratings item symbol min. max. unit supply voltage for logic v dd 0 4.0 v input signal voltage ?????? 1) v in -0.3 6.0 v led forward current ????? 2) if - 30 ma reversed voltage ??????? 2) vr - 5 v supply voltage for touch panel v tp 0 6.0 v input current of touch panel i tp 0 0.5 ma 1) input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d 2) for each ?an-ca? 4-2. environmental absolute maximum ratings item symbol min. max. unit operating temperature 1) t op -20 70 c storage temperature 2) t sto -30 80 c operating humidity 3) h op 10 4) %rh storage humidity 3) h sto 10 4) %rh vibration - 5) 5) - shock - 6) 6) - 1) operating temperature means a temperature which operation shall be guaranteed. since display performance is evaluated at 25c, another temperature range should be confirmed. 2) temp. = -30c ? 48h , temp. = 80c ? 168h ??? store lcd at normal temperature/humidity. keep them free from vibration and shock. an lcd that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard. ? (please refer to ?precautio ns for use? for details.) 3) non-condensing ? 4) temp. ? 40c, 85%rh max. ?? temp. ? 40c, absolute humidity shall be less than 85%rh at 40c. ? 5) ?? frequency 10 ? 55 hz vibration width 0.15mm acceleration value (0.3 ? 9 m/s 2 ) interval 10-55-10 hz ? minutes ??????? 2 hours in each direction x, y, z (6 hours total) ??????? eiaj ed-2531 ? 6) acceleration: 490 m/s 2 , pulse width: 11 ms ? 3 times in each direction: x, y, z ??? eiaj ed-2531 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 4 m804001 ???????????????????????????????? 5. electrical characteristics ? 5-1. lcd ????????????? ???? temp. = -20 ? 70c item symbol condition min. typ. max. unit supply voltage 1) v dd - 3.0 3.3 3.6 v current consumption i dd 2) - 170 80 ma permissive input ripple voltage v rp - - - 100 mvp-p v il "low" level 0 - 0.3v dd v input signal voltage 3) v ih "high" level 0.7v dd - v dd v 1) v dd -turn-on conditions ???????????????????????????????? 0 ? t1 ? 20ms ?????????????????????????????????? ??? 0 ? t2 ? 50ms ??????????????????????????????? ? ? 0 ? t3 ? 1s 2) display pattern: v dd = 3.3v, temp. = 25c 123 456 789 ~~~~~~~~~~~~~~ 1918 1919 1920 (dot) ? 1 2 3 : : : 479 480 (dot) ????????? ?????????? ????????? ?????????? ????????? ?????????? ????????? ?????????? 3) input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d 3.0v 3.0v 0.3v t1 t2 t3 signal 3) www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 5 m804001 ???????????????????????????????? 5-2. touch panel item symbol condition min. typ. max. unit supply voltage for touch panel v tp - - 5.0 - v xl-xr - 200 - 1200 ? terminal resistance 1) yu-yl - 200 - 1000 ? linearity 2) - - less than 2.5 % insulation resistance 3) - dc25v 50 - - m ? chattering 4) - at on/off less than 10 ms 1) resistance between terminal xl and xr, or between yu and yl 2) apply 5vdc to the terminal xl-xr, and measure the output voltage at terminal y when a random input is applied in the active area. measure the difference between the output and theoretical voltages. (measure the actual voltage at the terminal using the same method.) 3) resistance between the up per and lower terminals. 4) apply 5vdc to the terminal xl-xr, and measure the oscillation at terminal y when applying a random input in the active area. (measure the oscillation at terminal x using the same method.) voltage ?y chattering ?????? time e linearity ????a? e1-e0 ? emax e1 e0 theoretical voltage g??y output voltage z??y voltage ?y active area ??a??? (%) www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 6 m804001 ???????????????????????????????? 6. optical characteristics ?? ????????? ???????? measuring spot = 6.0mm, temp. = 25c item symbol condition min. typ. max. unit rise r = =0 - 10 - ms response time down d = =0 - 25 - ms upper - 80 - lower - 80 - deg. left - 80 - viewing angle range view direction : 6 o?clock (gray inversion) right cr ? 5 - 80 - deg. contrast ratio cr = =0 300 500 - - brightness l if=15ma/line (210) (310) - cd/m 2 x 0.56 0.61 0.66 red y = =0 0.32 0.37 0.42 x 0.29 0.34 0.39 green y = =0 0.52 0.57 0.62 x 0.09 0.14 0.19 blue y = =0 0.06 0.11 0.16 x 0.28 0.33 0.38 chromaticity coordinates white y = =0 0.30 0.35 0.40 - 6-1. definition of contrast ratio cr(contrast ratio) 1 brightness with all pixels "white" brightness with all pixels "black" 6-2. definition of response time 90./;5,:: ? + ? 9 /0;, 3(*2 /0;, www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 7 m804001 ???????????????????????????????? 6-3. definition of viewing angle 6-4. brightness measuring points 1) rating is defined on the average in the viewing area.(measured point 1 ? 5) 2) measured 30 minutes after the led is powered on. (ambient temp. = 25c) ?? ? ?@ @ ? ?? ? ?@ ? ?+09,*;065 ?+09,*;065 @ (dot) (dot) 3 03 03 0 0 1 2 3 4 5 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 8 m804001 ???????????????????????????????? 7. interface signals 7-1. lcd panel and led no. symbol description i/o note 1 gnd gnd - 2 ck clock signal for sampling each data signal i 3 h sync horizontal synchronous signal (negative) i 4 v sync vertical synchronous signal (negative) i 5 gnd gnd - 6 r0 red data signal (lsb) i 7 r1 ? red data signal i 8 r2 ? red data signal i 9 r3 ? red data signal i 10 r4 ? red data signal i 11 r5 ? red data signal (msb) i 12 gnd ? gnd - 13 g0 ? green data signal (lsb) i 14 g1 ? green data signal i 15 g2 ? green data signal i 16 g3 ? green data signal i 17 g4 ? green data signal i 18 g5 green data signal (msb) i 19 gnd ? gnd - 20 b0 ? blue data signal (lsb) i 21 b1 ? blue data signal i 22 b2 ? blue data signal i 23 b3 ? blue data signal i 24 b4 ? blue data signal i 25 b5 ? blue data signal (msb) i 26 gnd ? gnd - 27 enab signal to settle the hori zontal display position (positive) i 1) 28 v dd ? 3.3v power supply - 29 v dd ? 3.3v power supply - 30 r/l horizontal display mode select signa l l : normal , h : left / right reverse mode i 2) 31 u/d vertical display mode select signa l h : normal , l : up / down reverse mode i 2) 32 nc ? no connect - 33 ca1 ? cathode 1 - 34 ca2 ? cathode 2 - 35 ca3 ? cathode 3 - 36 ca4 ? cathode 4 - 37 an1 ? anode 1 - 38 an2 ? anode 2 - 39 an3 ? anode 3 - 40 an4 ? anode 4 - ???? lcd connector imsa-9681s-40a-gf (iriso) ???? recommended matching ffc or fpc 0.5mm pitch www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 9 m804001 ???????????????????????????????? 1) the horizontal display start timing is settled in accordance with a rising timing of enab signal. in case enab is fixed "low", the horizontal start timing is determined. don't keep enab "high" during operation. 2) r/l = l ??????????? r/l = h u/d = h ?????????? u/d = h r/l = l ??????????? r/l = h u/d = l ?????????? u/d = l 7-2. touch panel ??? touch panel side connector ??? 1.25mm pitch recommended matching connector 04ffs-sp-gb-tf(lf)(sn) (jst) 00-8370-049-000-888+ (elco) . symbol description 1 yl y-lower terminal 2 xl x-left terminal 3 yu y-upper terminal 4 xr x-right terminal www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 10 m804001 ???????????????????????????????? 8. input timing characteristics 8-1. timing characteristics item symbol min typ max unit note frequency 1/tc 22.66 25.18 27.69 mhz clock duty ratio tch/tc 40 50 60 % set up time tds 10 ns data hold time tdh 10 ns 30.0 31.8 s cycle th 770 800 850 clock pulse width thp 5 30 clock set up time ths 10 ns horizontal sync. signal hold time thh 10 ns 515 525 535 line enab=l cycle tv 515 525 560 line with enab pulse width tvp 1 3 5 line set up time tvs 10 ns vertical sync. signal hold time tvh 10 ns pulse width tep 640 clock set up time tes 10 ns enable signal (enab hold time teh 10 ns h sync - enable signal phase difference the 112 144 175 clock 0 4 clock enab=l h sync - v sync signal phase difference thv 10 ns with enab vertical sync. signal start position tve 2 35 76 line horizontal display period thd 640 clock vertical display period tvd 480 line 1) when enab is fixed at "low", the horizontal disp lay starts from the data of c144 (clock) as shown in 8-3. 2) when enab is fixed at "low", the vertical sync . signal start position is 35 (line) as shown in 8-3. 3) in case of lower frequency, the deterioration of the display quality, flicker etc., may occur. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 11 m804001 ???????????????????????????????? 8-2. input data signals and display position on the screen 8-3. input timing characteristics ? 1) when enab is fixed at "low", the horizontal display starts from the data of c68 (clock). ? 2) when enab is fixed at "low", the vertic al sync. signal start position is 18 (line ? ? ? ?o ?o ?o ? ? ? ? (;(? 5()3,?:0.5(3 ? ? e? 690a65;(3?:@5*? ? ?
e? 7 ? : ? */ ? +: ? +/ ? ? ? ? y? ? ,9;0*(3?05=(30+?+(;(?7,906+ ? ? : ? + ? 7 ? 7 ? ? ? ? + ? ? ? ? ?? ?
36*2?:05.(3 ? ?
e? (;(?:0.5(3? ??? ? ? ? e? (;(? 5()3,?:0.5(3 ? ? e? ,9;0*(3?:@5*? ? :0.5(3? ?
e? 690a65;(3? @5*??:0.5(3? ?
e? (;(?:0.5(3? ??? ? ? ? e? ,9;0*(3?05=(30+?+(;(?7,906+ ? number of h-data
? ?
?
?? ? ?305, ? 305, ?? ? ????????? ???????? ? 305, ? ?t ? ? ? ?t ? ? ? ? ? ? ? ?t ? ?t ? ?t ? ? ? ? ? ? ? ?t ? ? ? ? ? * ? 690a65;(3?05=(30+?+(;(?7,906+? ? ? ? ? ?t ? / ? / ? ? ? ?t ? ? ? ? ? ? ?
36*2?:0.5(3 ? ?
e? : ? / ? ?t ? ? ? 690a65;(3?05=(30+?+(;(?7,906+ ? www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 12 m804001 ???????????????????????????????? 9. backlight characteristics te mp.=25 ? item symbol min. typ. max. unit note forward current 1) if - 15 - ma ta=-20 ? 70c - 22.1 25.0 v if=15ma, ta=-20 ? - 21.7 24.5 v if=15ma, ta=25 ? forward voltage 1) vf - 21.3 24.1 v if=15ma, ta=70 ? operating life time 2), 3) t - 37,000 - h if=15ma, ta=25 ? 1) for each ?an-ca? 2) when brightness decrease 50% of minimum brightness. the average life of a led will decrease when the lcd is operating at higher temperatures. 3) life time is estimated data.(condition : if=15ma, ta=25 ? in chamber). 4) an input current below 5. 0ma may reduce the brightness uniform ity of the led backlight. this is because the amount of light from each le d chip is different. therefore, please evaluate carefully before finalizing the input current. 10. design guidance for analog touch panel 10-1. electrical (in customer's design, please remember the following considerations.) 1) do not use the current regulated circuit. 2) keep the current limit with top and bottom layer. (please refer to ?electrical absol ute maximum ratings? for details.) 3) analog touch panel can not sense two points touching separately. 4) a contact resistance is appeared at the touch point between top and bottom layer. after this resistance has stable read of the touch panel position data. 5) because noise of inverter or peripheral circuits may interfere signal of touch panel itself ?? it is necessary to design carefully in advance to avoid these noise problem. 10-2. software 1) do the "user calibration". 2) "user calibration" may be needed with long term using. include "user calibration" menu in your software. 3) when drawing a line with a stylus, there may be a slight discontinuity when the stylus passes over a spacer-dot. if necessary, please provide a compensation feature within your software. 10-3. mounting on display and housing bezel 1) do not use an adhesive tape to bond it on the front of touch panel and hang it to the housing bezel. 2) this touch panel has an airtight but not watert ight structure. please not to use it for the applications requiring watertight or under the environments occurred condensation. if it is expected to be exposed to the environments that vapor, moisture or other liquids may seep inside a bezel, please be sure to take some meas urements for drip-proof or waterproof by using sealing materials on the bezel. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 13 m804001 ???????????????????????????????? 3) in cases where the touch panel is bent or twisted, newton's rings may become visible. please do not attach the touch panel to the lcd with a bend or twist and use similar precautions when mounting the assembled unit in the final product. furthermore, design the final product so that the touch panel is not bent during use. 11. lot number identification ? the lot number shall be indicated on the back of the backlight case of each lcd. TCG057VGLBG-H50 - - - made in ???? ???? ??? ? 1 2 3 4 5 ?? year 2010 2011 2012 2013 2014 2015 code 0 1 2 3 4 5 month jan. feb. mar. apr. may jun. code 1 2 3 4 5 6 month jul. aug. sep. oct. nov. dec. code 7 8 9 x y z 12. warranty ? 12-1. incoming inspection ?? please inspect the lcd within one month after your receipt. ? ? 12-2. production warranty ?? kyocera warrants its lcd?s for a period of 12 months from the ship date. kyocera shall, by mutual agreement, replace or re-work defective lcd?s that are shown to be kyocera?s responsibility. no1. - no5. above indicate 1. year code 2. month code 3. date 4. version number 5. country of origin (japan or china) www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 14 m804001 ???????????????????????????????? 13. precautions for use 13-1. installation of the lcd 1) the lcd shall be installed so that there is no pressure on the lsi chips. 2) the lcd shall be installed flat, without twisting or bending. 3) must maintain a gap between inside of bezel and touch panel to avoid malfunction or electrode damage of touch panel. 4) a transparent protection sheet is attached to the touch panel. please remove the protection film slowly before use, paying attention to static electricity. 13-2. static electricity 1) since cmos ics are mounted directly onto the lcd glass, protection from static electricity is required. 2) workers should use body grounding. operator should wear ground straps. 13-3. lcd operation 1) the lcd shall be operated within the limits spec ified. operation at values outside of these limits may shorten life, and/or harm display images. 13-4. storage 1) the lcd shall be stored within the temperature and humidity limits specified. store in a dark area, and protect the lcd from direct sunlight or fluorescent light. 2) always store the lcd so that it is free from external pressure onto it. 13-5. usage 1) do not store in a high humidity environment for extended periods. polarizer degradation bubbles, and/or peeling off of the polarizer may result. ? 2) do not push or rub the touch panel's surface with hard to sharp obje cts such as knives, or the touch panel may be scratched. ? 3) when the touch panel is dirty, gently wipe the surface with a soft cloth, sometimes moistened by mild detergent or alcohol. if a ha zardous chemical is dropped on the touch panel by mistake, wipe it off right away to prevent human contact. ? 4) touch panel edges are sharp. handle the touch panel with enough care to prevent cuts 5) always keep the lcd free from condensation during testing. condensation may permanently spot or stain the polarizer. 6) do not disassemble lcd because it will result in damage. 7) this kyocera lcd has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. hence, when the lcd is supposed to be used in a special environment, evaluate the lcd thoroughly beforehand and do not expose the lcd to chemicals such as an active gas. 8) please do not use solid-base image pattern for long hours because a temporary afterimage may appear. we recommend using screen saver etc. in cases where a solid-base image pattern must be used. 9) liquid crystal may leak when th e lcd is broken. be careful not to let the fluid go into your eyes and mouth. in the case the fluid touches your body ; rinse it off right away with water and soap. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1dez28-00 part no. TCG057VGLBG-H50 page 15 m804001 ???????????????????????????????? 14. reliability test data ?? te st ite m te st co ndi tio n te st ti me judge me nt high temp. atmosphere 80c 240h display function display quality current consumption : no defect : no defect : no defect low temp. atmosphere -30c 240h display function display quality current consumption : no defect : no defect : no defect high temp. humidity atmosphere 40c 90% rh 240h display function display quality current consumption : no defect : no defect : no defect te mp. cycle -30c r.t. 80c 0.5h 0.5h 0.5h 10cycles display function display quality current consumption : no defect : no defect : no defect high temp. operation 70c 500h display function display quality current consumption : no defect : no defect : no defect touch panel function terminal resistance linearity actuation force : no defect : no defect : no defect : no defect point activation 1) silicon rubber, tip : r = 4.0 hardness 60 hitting force 2.94n hitting speed 5 time/s one million times no appearance defect which affects touch panel function. 2) touch panel function terminal resistance linearity actuation force : no defect : no defect : no defect : no defect sliding 1) polyacetal resin, tip : r = 0.8 load 2.45n input length 10mm input speed 50mm/s 100 thousand times 3) no appearance defect which affects touch panel function. 2) 1) test in active area. 2) dents, blurs and marks on surface film: neglected. 3) 10mm sliding (back and forth) counts as 2 times. 4) temp. cycle test (heat shock included): the lcd shall be tested after leaving it stabilize at room temperature for 2 hours after the last cycle. 5) an operational test was performed after the fo llowing conditions. first, the touch panel was left for a certain time under 5v voltages applied (without touc h), then it was left at room temperature (no vdc applied) for 2 hours. 6) each test item uses a test lcd only once. the tested lcd is not used in any other tests. 7) the lcd is tested in circumstances in which there is no condensation. 8) the reliability test is not an out-going inspection. 9) the result of the reliability test is for your reference purpose only. ?? the reliability test is conducted only to examine the lcd's capability. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
??????????????????????????????????????? spec no. tq3c-8eaf0-e2dez28-00 date may 24, 2010 k y o c e r a i n s p e c t i o n s t a n d a r d t y p e : t c g 0 5 7 v g l b g - h 5 0 kyocera corporation ? kagoshima hayato plant lcd division designed by : engineering dept. co nfirmed by : qa dept. original issue date prepared checked approved checked approved may 24, 2010 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e2dez28-00 part no. TCG057VGLBG-H50 page - revision record designed by : engineering dept. confirmed by : qa dept. date prepared checked approv ed checked approved rev.no. date page descriptions www.datasheet.co.kr datasheet pdf - http://www..net/
? ? spec no. tq3c-8eaf0-e2dez28-00 part no. TCG057VGLBG-H50 page 1 ? ??????????????????????????????????????????????????????????????? ???????? ? visuals specification 1) note note 1. customer identified anomalies not defined wi thin this inspection standard shall be reviewed by kyocera, and an additional standard shall be determined by mutual consent. 2. this inspection standard about the image quality shall be applied to any defect within the active area and shall not be applicable to outside of the area. general 3. inspection conditions luminance inspection distance temperature direction ?????? : 500 lux min. : 300 mm. : 25 ? 5 ? : directly above bright dot defect the dot is constant ly ?on? when power applied to the lcd, even when all ?black? data sent to the screen. inspection tool: 5% transpar ency neutral density filter. count dot: if the dot is visible through the filter. don?t count dot: if the dot is not visible through the filter. ?? dot defect black dot defect the dot is constantly ?off? when power applied to the lcd, even when all ?white? data sent to the screen. dot defect adjacent dot adjacent dot defect is defined as two or more bright dot defects or black dot defects. ?? dot defect bubble, scratch, foreign particle (polarizer, cell, backlight) visible operating (all pixels ?black? or ?white?) and non operating. external inspection appearance inspection does not satisfy the value at the spec. others led wire damaged to the led wires, connector, pin, functional failure or appearance failure. definition of inspection item definition of size definition of circle size 31 ( 01 )/2 definition of linear size www.datasheet.co.kr datasheet pdf - http://www..net/
? ? spec no. tq3c-8eaf0-e2dez28-00 part no. TCG057VGLBG-H50 page 2 ? ??????????????????????????????????????????????????????????????? ???????? ? 2) standard classification inspection item judgement standard bright dot defect acceptable number bright dot spacing : 4 : 5 mm or more black dot defect acceptable number black dot spacing : 5 : 5 mm or more bright dot defect acceptable number : 2 2 dot join black dot defect acceptable number : 3 3 or more dots join acceptable number : 0 dot defect total dot defects acceptable number : 5 max defect (in lcd glass) others white dot, dark dot (circle) size (mm) acceptable number 0.2 ? d ? 0.2 (neglected) 0.2 ? d ? 0.4 5 0.4 ? d ? 0.5 3 0.5 ? d ? 0.4 0 polarizer (scratch) width (mm) length (mm) acceptable number 0.1 ? w ? 0.1 ?,.3,*;,+e 2.0 ? l ? 5.0 ?,.3,*;,+e 0.1 ? w ? 0.3 5.0 ? l ? 5.0 0 0.3 ? w ? 0.3 0 polarizer (bubble) size (mm) acceptable number 0.2 ? d ? 0.2 (neglected) 0.2 ? d ? 0.3 5 0.3 ? d ? 0.5 3 0.5 ? d ? 0.4 0 foreign particle circular shape size (mm) acceptable number 0.2 ? d ? 0.2 (neglected) 0.2 ? d ? 0.4 5 0.4 ? d ? 0.5 3 0.5 ? d ? 0 .4 0 external inspection (defect on polarizer or between polarizer and lcd glass) foreign particle linear shape scratch width (mm) length (mm) acceptable number 0.00 ? w ? 0.03 ?,.3,*;,+e 2.0 ? l ? 2.0 ?,.3,*;,+e 2.0 ? l ? 4.0 3 0.03 ? w ? 0.1 0 4.0 ? l ? 5.0 0 0.1 ? w ? 0.3 (according to circular shape) www.datasheet.co.kr datasheet pdf - http://www..net/
? ? spec no. tq3c-8eaf0-e2dez28-00 part no. TCG057VGLBG-H50 page 3 ? ??????????????????????????????????????????????????????????????? ???????? ? inspection item judgement standard scratch, foreign particle (touch screen portion) w = width, l = length, d = diameter = (major axis minor axis)/ 2 item width(mm) length(mm) acceptable number d ? 0.03 l ? 20 neglected 0.03 ? d ? 0.05 l ? 10 2pcs within 20mm 0.05 ? d ? 0.08 l ? 6 2pcs within 20mm scratch 0.08 ? d ? 0.1 l ? 4 1pcs within 30mm w ? 0.05 neglected neglected foreign line like 0.05 ? w ? 0.1 l ? 5 2pcs within 30mm d ? 0.2 neglected foreign circle like 0.2 ? d ? 0.3 2pcs within 30mm above are applied to the visible area. unless there are foreign part icle and damage affected seriously to the electrical performance out of the active ar ea, we approve of this product. glass crack (touch screen portion) item size (mm) acceptable number x ? 3 y ? 3 corner crack z ? t 2 pcs /panel x ? 5 y ? 1.5 crack in other area than in corner z ? t 2 pcs /side progressive crack . 0 pcs (ng even 1pcs) above are applied to the visible area. unless there are foreign part icle and damage affected seriously to the electrical performance out of the active area , we approve of this product. newton?s ring all newton rings in the center of the screen must be rejected. border around the screen are permitted. ? # ? $ ? www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of TCG057VGLBG-H50

	To Download TCG057VGLBG-H50 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .